Repairing Air Conditioning Ductwork

Posted by on Nov 5, 2014 in Uncategorized

Your air conditioning system is able to provide cool air to every room in your home through a series of ducts that are behind walls, in attics, etc. Because you can’t see the ductwork, it tends to be ignored. But, it is important to keep your ductwork in good repair in order to ensure that your air conditioning system is always going to be working properly. It may be that there are areas of the ductwork that needs to be repaired or cleaned. For instance, if small critters get into the ductwork—and this happens a lot—they can chew through it and create a lot of damage. Here are three ways that you can repair ductwork, using materials you can purchase from air conditioning ducting suppliers and hardware stores. Making Temporary Repairs With Duct Tape If sections of the ductwork need to be removed in order to clean the ducts, or if there are any cracks in the ductwork or the seams, you can temporarily repair these problems simply by using a roll of duct tape. It is extremely durable, and is commonly used to hold duct seams together so there are no air leaks. You can get this at any hardware store, and it is also available through air conditioning ducting suppliers. Use the duct tape to cover small holes, seams, and other areas where there are minor damages. Installing Duct Sections When sections of your ductwork are broken or damaged, it doesn’t mean that you need to replace everything. You can get duct sections from air conditioning ducting suppliers to repair the damage, and it is available in many different lengths, depending on how much you need. First, use a pair of sharp scissors to cut out the sections to be replaced. Put the duct sections on, using duct tape to hold them in place. Repairing Metal Ductwork If the ductwork in your home is older, it is likely made from metal tubes. You can get pieces of sheet metal to repair this type of ductwork. You will need to have a pair of tin snips to cut the damaged part away, and to cut the sheet metal to the size you need. All you have to do is cut a piece of the sheet metal that will fit over the damaged area, and put it on with metal screws. Don’t forget to seal everything with duct tape. Replacing Insulation The insulation around the ductwork in your home can become damaged over time, especially if there are small animals tearing and chewing at it. You can buy small insulation sections for this type of repair work, which you will need to cut to fit. Remove the damaged insulation, wrap the new insulation around the ducts and use duct tape to make sure the insulation stays put. For more information, visit a local air duct supplier, such as Air-Con...

Read More »

2 Major Things You Need to Know about Living on a Houseboat

Posted by on Nov 4, 2014 in Uncategorized

In this age of fast-paced living and consumer culture, many people feel more and more inclined to either drop out of the rat-race altogether—or investigate alternative methods of living which create a greater capacity for autonomy in one sense or another. For that reason there is often something alluring and romantic about the houseboat. You’re never anchored to one place for longer than you’d like it to be, and you’re never forced into the monotony of neighbourhood politics. If you happen to be feeling the lure of the open waterways and considering life aboard a houseboat, here are a couple of basics you need to know in advance. You Don’t Get Much Space This one should essentially go without saying. On a houseboat, you are bound to have less space for the complexities of your day-to-day life than you were used to in even a modest apartment. For this reason, one of your first priorities when preparing for your move onto the boat should be to radically trim the excess belongings from your life and try to arrive with as light a load as possible. Clutter can be destabilising in any environment, but when you live in a confined space it is all the more important to be orderly. Here is a list of the basic spaces you can expect your houseboat to have, along with their proper “sea-names”: Berth—Bed Cabin A “Common Area” Head—Bathroom Galley Kitchen / Kitchenette Stateroom—Bedroom Cockpit Steering Area Nav. Station—Navigation Equipment Area They Come in Two Varieties Unbeknownst to many people, houseboats come in two broad categories: cruising houseboats and non-cruising houseboats. Cruising houseboats are designed to move, usually fitted with powerful engine systems and sails. They tend to have a variety of features which the non-cruising variety don’t. They specifically have on-board power generators, extra battery units, waste and clean water tanks. Non-cruising houseboats are designed to stay moored in one place. They may feature very small, weak engines but often have none whatsoever. These are not functional “boats” in the way you may understand them, but rather are something like floating apartments. Non-cruising houseboats often don’t feature the “travel adaptations” that are common in cruising houseboats. For example, they will frequently need to be connected by hose to separate clean water and waste disposal outlets, rather than having their own tanks. Living in a houseboat might be the next ideal home for you. Contact experts such as Kia Marina Houseboat Hire to learn more about your...

Read More »

Five Ways To Take A Hot Shower Or Bath If Your Hot Water Heater Is Broken

Posted by on Nov 3, 2014 in Uncategorized

If your hot water heater breaks, you will be without a hot bath or shower until the repair professional arrives to fix it. Luckily, however, there are ways to get a hot bath or shower even without a working hot water heater. Here are five ideas you should try: 1. Camping Shower A camping shower features a bladder of water attached to a shower head. Allow the water to warm up in the hot sun, and then, for privacy, take the camping shower into your house and stand in your bathtub or shower while you use it. If you don’t have a camping shower, make your own. Use an old plastic bottle for the bladder, and attach a length of garden pipe to the bottle’s opening to create a shower. 2. Barrel of Boiling Water Instead of panicking that your hot water heater is broken, get excited about the fact that you now have the chance to bathe like the early Australian settlers. To do so, simply, boil big pots of water on your stove and pour it into your bathtub. If you want a more authentic old-timey bath, use an actual rain or pickle barrel instead of your bathtub. 3. Neighbourly Assistance If you are comfortable with the idea, ask a neighbour if you can use their shower. It’s better than feeling greasy all day long.  4. Gym Membership If you can’t get your hot water heater repaired or replaced for a few months, you need to look for a long-term showering option, and the gym is a fabulous idea. Join one or look for one that offers a free week or month trial membership. In the morning, go hit the treadmill for an hour, and then jump in the hot showers in the locker room. If you only need hot water for a day or two, buy a day pass to a rec centre and shower there. 5. Embracing the Cold If you don’t want to use a camping shower, boil water, talk to the neighbours or join a gym, it may be time to embrace the benefits of cold showers. Cold showers can improve your circulation, help you sleep better and encourage weight loss. Unfortunately, however, they won’t get you as clean as a hot shower. However, you can enjoy cold showers for at least a couple of days while you wait for a repair or replacement. For more information on fixing a hot water heater, contact a company like Affordable Hot Water....

Read More »

Things You Should Know About Ducted Vacuum Hoses And Maintenance

Posted by on Nov 3, 2014 in Uncategorized

Purchasing and having a ducted vacuum system installed is a simple solution for many homeowners. One aspect of the system you may not consider is the maintenance. In fact, you may think that the entire system is as easy to clean and maintain as the main collection unit. But there are certain things you should know about ducted vacuum hose maintenance. Avoid Certain Items The first step to proper ducted vacuum hose maintenance is to avoid certain items. Make sure you aren’t picking up any sharp items like toothpicks or hair pins. These can cause blockages and can rip or tear the hose. Also try to avoid large pieces of paper or hair that can cause blockages. Any type of blockage can lower the suction of the hose, and it can also cause the system to work harder during cleaning. Remove the Hose for Cleaning If you do need to clean the hose and remove a blockage, or perform routine maintenance, make sure to remove it from the wall. If you leave it connected to the wall, you can risk damaging not only the hose, but also the wall connection as well. If you feel that the blockage or issue requires deep cleaning or maintenance, make sure to contact your ducted vacuum servicing technician. Use the Proper Hose Length If you want to avoid pulls, snags and rips in the hose, make sure you are using the right length for the room you are cleaning. You can do this by marking on the hose what rooms it can be used in effectively. If the hose doesn’t reach the farthest corner you are trying to clean, then find a hose that does. Remember, if you pull the hose to try and make it reach, you could end up damaging the wall duct as well as the hose. This will cause a much higher repair cost and possible wall repair. Know Your Limits One of the key things to remember when you are dealing with ducted vacuum systems, hoses and maintenance is to know your limits. If you feel that you can’t fix an issue, remove a blockage or clean the unit properly, call a professional. They can ensure that your system is cleaned and maintained, but they may also offer a warranty on their maintenance services as well. These are just a few things you should know about ducted vacuum hoses and maintenance of those hoses. If you have any questions, contact your service technician. They can offer answers, help and services to make sure your ducted vacuum runs...

Read More »
Page 2 of 212